OTM 4038B Drain Spud
Overview
Replacement OTM4038B Drain Spud. The original plastic 4038 drain spud has been discontinued by the manufacturer. The solution we created is permanent and will never require replacement again. Designed for a 1/2 inch ID hose to slide onto it.
Installation Steps:
1) Remove the OLD drain spud from your humidifier.
2) Clean the surface of the new drain spud and the base of the humidifier cabinet at the drain spud location.
3) Apply a small amount of silicone caulking (not included) to the humidifier base to seal the drain spud.
4) Insert the new drain spud and allow to dry for 24 hours before re-installing the humidifier.
5) Care must be taken when connecting the drain line to the new drain spud.
Specifications
Manufacturer | OTM |
---|---|
Product Length | 1.550 |
Product Width | 1.100 |
Product Height | 1.050 |
Product Weight | 0.105 |
Dimension Length | 4.100000 |
Dimension Width | 3.950000 |
Dimension Height | 1.100000 |
Compatibility
- Aprilaire 110 Fan Powered Humidifier 1 Needed
- Aprilaire 112 Fan Powered Humidifier 1 Needed
- Aprilaire 220 Humidifier Parts 1 Needed
- Aprilaire 224 Humidifier Parts 1 Needed
- Aprilaire 330 Humidifier Parts 1 Needed
- Aprilaire 440 Humidifier Parts 1 Needed
Reviews 7
Browser Not Supported
You are using Internet Explorer as your browser, which is no longer supported by our website. Because of this, you can view products but not place orders using Internet Explorer on our site.
Please update your browser to any of the modern browsers listed below or use a different internet browser to place an order on this site.
If you have any questions or need assistance with placing an order, please contact us at 800-825-2148 or sales@airqualityparts.com